|
Husky demonstrates range of innovative technologies for beverage packaging at NPE 2015
3/24/2015 |
|
|
including revolutionary self-cleaning mold technology for HyPET HPP5
BOLTON, Ontario - A one push-button mold cleaning in eight seconds instead of four hours, and ten times fewer cleaning interventions on a machine: Husky Injection Molding Systems today announced that at NPE 2015 (March 23 - 27, Orlando, Florida), it will provide live demonstrations of its revolutionary new self-cleaning mold technology for the HyPET® HPP5 preform manufacturing system, located at Booth #2117 in the West Hall. The new mold feature is part of the reduced maintenance package for the HyPET® HPP5 system and can extend cleaning and greasing requirements to approximately every 500,000 cycles. This represents a dramatic improvement over conventional technology in the industry.
"With cycle times getting faster, one could expect shorter maintenance intervals, more maintenance, and shorter mold life. Instead, HyPET® HPP5 overcomes the contradiction between cycle time and mold maintenance. Self-cleaning can eliminate up to 400 hours of maintenance time per year, which results in 5% more production time," said Nicolas Rivollet, Husky's Director of Business Development. Self-cleaning is a push-button that uses controlled flash of the tool to collect and remove dust built up in the vents. Completely automated, totally reliable, and consistent, self-cleaning does not require an operator to go inside the machine, and can be performed as often as needed as there is virtually zero time penalty on production.
The system at NPE will also be equipped with Husky's enhanced mold alignment technology that enables time to first refurbishment to be extended three times, while improving cycle times and part quality. Using six sensors to detect the position of the core plate with respect to the cavity plate, the HyPET® HPP5 mold alignment is a real-time, 3D measurement of the alignment displayed as constant feedback on the HMI. If misalignment occurs, the HMI provides specific instructions to resolve it. By simply turning a positioning device, the operator can re-align the tool with a resolution of a few microns, before the offset can cause excessive wear and impact quality.
Since its launch in late 2013, the HyPET® HPP5 system has had a very strong response from customers. In a short sixteen months the company has sold over seventy systems, with nearly forty installed and producing high quality preforms in customer facilities across the globe. The HyPET® HPP5 system at NPE will run a lightweight carbonated water preform application with a 10.89 gram part weight on a 96cav 50x140 pitch mold at a very aggressive 5.5 second cycle time. With this preform, HyPET® HPP5 is approximately 50% faster than the industry averages for the same type of applications.
"We continue to make significant investments to better understand the production issues our customers face so that we can offer new technologies to respond to these challenges. This is what we will demonstrate at NPE 2015," said Robert Domodossola, Vice President of Engineering and Business Development at Husky. "With our latest innovations we have paid particular attention to improving availability, as producing better parts at a lower cost for longer production intervals ensures customers can be more competitive."
Offering a whole new experience for Husky customers, the display at NPE will focus on providing visitors a more intimate opportunity to engage with Husky solutions and representatives. Holding the leading market share of high-volume PET manufacturing equipment, Husky offers a full suite of equipment and services for the plastics industry, and an unmatched level of global support in over 40 countries. Serving the industry for more than 35 years, Husky's preform injection molding workcells deliver the industry's lowest total production costs for the widest range of applications and capacity needs. Value-added services include preform development, factory planning, customer training, systems integration and complete asset management. |
|
Related Exhibition:
|
|
|
 |
|
NPE 2015
|
The International Plastics Showcase
3/23/2015 - 3/27/2015
Venue: Orange County Convention Center, Orlando FL, United States
|
|
|
|
|
|
|
主站蜘蛛池模板：
内射在线播放|
蜜桃视频在线网站免费看|
亚洲精品系列|
国产一区一一区高清不卡|
午夜一级片|
日本黄漫动漫在线观看视频|
欧洲精品99毛片免费高清观看|
免费A片国产毛无码A片|
自拍性旺盛老熟女|
午夜色色影院|
国产又色又爽又黄的视频在线|
人妻人人做人碰人人添|
国产精品一二三区视在线|
免费92淫黄看电影|
高清无码人妻|
av窝窝|
免费观看成人毛片a片|
亚洲精品免费0|
国产色AV|
亚洲AV日韩AV永久无码网站|
日本高清WWW无色夜在线视频|
欧美视频在线播放观看免费福利资源
|
欧美巨大巨粗黑人性aaaaaa|
亚洲中文无码成人片|
日韩精品人妻中文字幕无码网址|
亚洲成女人图区一区二区|
www.99re6|
国内精品国产三级国产99|
98国产精品永久在线观看|
国产AV大陆精品一区二区三区|
久久精品女人天堂av免费观看
|
亚洲另类在线制服丝袜国产|
日本国产精品高清在线|
亚洲无码21|
亚洲综合区小说区激情区噜噜|
精品无码久久午夜福利|
久久国产精品老女人|
男女一级国产片免费视频|
a级黑人大硬长爽猛出猛进|
无限看片在线版免费视频大全|
欧美性色19p|
