|
EcoCVac by Dürr Ecoclean - innovative dry cleaning without compressed air
7/29/2015 |
|
|
Intermediate cleaning of powertrain parts with over 50% energy savings and high process reliability
Monschau/Germany, July 2015 - Machined powertrain components undergo intermediate cleaning to safeguard the quality of subsequent process steps. This is typically done by means of compressed air, which must be generated at a high expense of energy. With their new EcoCVac, Dürr Ecoclean offers an effective dry cleaning system that eliminates the need for compressed air. Apart from delivering enhanced process reliability, the system can provide energy savings of more than 50 percent. As maintenance of the working chamber is minimized, it also improves the machine availability.
Modern engine and transmission manufacturing lines are designed for maximum productivity and economic efficiency. Accordingly, any cause of interference with a downstream process must be eliminated. This makes it mandatory that engine and transmission parts such as, e.g., cylinder heads, engine blocks and transmission housings undergo cleaning operations between machining steps. Such intermediate cleaning is often performed by cleaning machines using compressed air. A benefit of this method is that the part is cleaned 'dry'. On the downside, however, generating the compressed air supply is very costly. Moreover, the chips and machining fluid residue adhering to the product are merely blown off - i.e., allowed to spread around in the work chamber, which will therefore become contaminated quickly. This, in turn, increases the risk of re-contamination of the product, with the possible result of impairing the next processing step.
Vacuum suction without compressed air in short cycles
With its innovative EcoCVac pre-cleaning and intermediate cleaning system, Dürr Ecoclean of Monschau/Germany has overcome these drawbacks. The equipment relies on the newly developed vacuum suction technology. This ensures that contaminants will be removed not just from the part but also from the work chamber within a mere 1.5 to 3 seconds of process time.
The EcoCVac system comprises a pressure vessel in which a vacuum is maintained permanently. This vessel is connected by a pipe to the vacuum chamber in which the part is placed. Once the chamber is closed, a powerful airflow is directed through it, thereby 'entraining' the chips sticking to the part and taking them into the vacuum vessel. A chip clean-out device integrated nearby separates chips and emulsion, allowing both to be discharged separately via a collecting bin and a flume, respectively.
More than 50 percent energy savings
In the development of the EcoCVac system, resource efficiency was a prime concern. As a result, the system affords a much-reduced energy consumption as compared to compressed-air type equipment. Assuming a compressed air consumption of 2.5 Nm3 per part at a price of 1.26 euro cents per Nm3, the cost of one compressed-air blowing cycle amounts to 3.15 euro cents per part. With the new vacuum dry cleaning process, an electric power input of 0.139 kWh per part is needed. At an estimated electricity price of 10.88 euro cents per kWh, power costs of 1.51 euro cents per part will thus be incurred. This is equal to a cost reduction by more than 50 percent.
Optimized process reliability and availability
In addition to the obvious cost benefits, the EcoCVac shines with its improved process reliability. As the chips are removed not only from the part but also from the work chamber, the risk of re-contamination is minimized. The chamber must hence be cleaned less often, and at a clearly reduced cost and effort. Moreover, unlike conventional compressed-air systems, there are no nozzles to be aligned relative to the part, e.g., during commissioning or after a collision. The system's availability rate is thus further improved. 
Photo: DE_EcoCVac_frontal
Dry cleaning without compressed air can yield energy savings of more than 50 percent in addition to process reliability gains.
Photo: DE_EcoCVac_Detail
The parts are cleaned in a vacuum chamber through which a powerful airflow is passed. This airflow not just reliably removes contaminants adhering to the part, but also conveys them out of the work chamber.
|
|
|
|
|
|
主站蜘蛛池模板：
亚洲永久精品免费在线|
在线亚洲午夜片av大片|
青春草在线播放在线观看视频
|
国产亚洲精品性爱视频|
亚洲高潮喷水无码AV电影|
欧美丰满少妇人妻精品|
亚洲色大成网站www永久|
伊人不卡中文字幕在线一区二区|
久草资源|
欧美最猛性xxxxx大叫|
日韩精品亚洲精品第一页|
午夜成人无码免费看网站|
超碰人人擦|
youjizz国产|
亚洲 欧美 国产另类首页|
一区二区三区精品日韩|
丁香婷婷综合激情五月色|
亚洲国产精品老熟女乱码|
国产午夜福利大片免费看|
99视频精品|
国产欧美日本亚洲精品一4区|
欧美深夜福利网站在线观看|
一区二区三区鲁丝不卡|
一本久道中文无码字幕av|
911国产精品|
国产精品自在自线免费观看|
国内揄拍国内精品少妇国语|
国产精品天干在线观看|
丁香激情网|
婷婷四房播播|
国产精品白浆无码流出|
中文字幕亚洲精品|
欧美亚洲另类自拍偷在线拍|
亚洲日本va午夜中文字幕久久|
亚洲欧美日韩精品久久亚洲区色播|
国产熟女网|
亚洲人成小说网站色在线
|
四虎影视永久在线精品|
青青国产揄拍视频|
日韩精品一区二区高清视频|
欧美整片sss|
