|
DME to Display Wide Range of Engineered Hot Runner Solutions at NPE
2/21/2012 |
|
|
Learn how DME can be your most complete partner in mold technologies at booth #2803
Madison Heights, Mich. - DME Company, a leading manufacturer of mold technologies, will be presenting a wide range of its hot runner products at NPE 2012, booth #2803.
For over 30 years, DME has offered a full spectrum engineered solutions essential for hot runner applications - everything from unitized valve gates to hot sprue bushings to complete turnkey hot halves ready to bolt on and operate. The company will be demonstrating many of its existing and new technologies at NPE in Orlando, Fla., from April 1-5, 2012.
"DME has been a leader in hot runner technology for nearly 40 years, but we never stop striving to be a better resource for our customers," said Craig Kovacic, DME Hot Runner Business Manager. "We continually seek out opportunities to make improvements that meet our industry demands, and as a result, we provide engineered solutions that make us a true partner to our customers."
Through its parent company, Milacron LLC, DME is linked into a vast network of resources and institutional knowledge that enable its engineers to better understand how its product fit into an overall production scheme for its customers.
"The most important component we offer our customers is our people," said Kovacic. "They are directly connected to the real-world needs of the industry. So they don't just build products; they serve as engineering partners to help our customers optimize efficiency it every way they can."
DME provides rugged, energy-efficient systems, and backs them with service and support that customers have grown to rely on. Today, the company continues to develop a new generation of hot runner systems that give customers marketplace competitive edge.
In fact, the company is now able to provide a number of "off-the-shelf" hot runner solutions, including components with same-day shipping, manifolds & components in 3-4 weeks, unitized systems in 4-5 weeks and full hot half systems in 5-6 weeks.
At NPE, DME will be showcasing the following systems and components, among other products:
• Manifold & Components DME delivers custom manifold and all critical components - including nozzles, heaters, support pads, dowels, terminal boxes and a design guide for layout of pocket machining. The manifold arrives completely machined to customer specifications with flow channels, both horizontal and vertical, and end plugs. Fast delivery is available on any of DME's open gate hot runner nozzles, including leading lines such as Stellar, Galaxy, Hot One, Gate-Mate and Cool One.
• Unitized Systems DME also offers Unitized Hot One, Galaxy and Stellar Systems. If customers lack the time or resources to assemble the manifold and components, these open gate or valve gate systems arrive plumbed, assembled, pre-heated, tested and ready to go.
Besides saving customers valuable time, a unitized system:
o Prevents potential damage (pinched thermocouples, cut wires, etc.)
o Ensures proper wiring and plumbing
o Eliminates potential leaks with properly installed seal rings
DME will also be introducing its new Unitized Valve Gate Hot Runner Systems at NPE. DME's valve gate hot runner systems offer superior cosmetics coupled with a simple setup. Just drop in the fully unitized valve gate system because everything is plumbed, assembled, pre-heated and tested before shipping. Choose from a comprehensive selection of high-quality components and systems for nearly any type of material.
• Full Hot Half Systems DME is also able to deliver a complete package system - matching unique gate locations, materials and other parameters. The systems are delivered fully wired with prepped water cooled plates and with riser pads and other components already fitted - eliminating the hassle of leaks or other headaches. With simple machining of the clearance bores, customers are ready to bolt on the A plate and start molding right away.
To learn more about DME hot runner systems, please visit http://www.dme.net/dme/products/hot_runner_sys.html.
|
|
Related Exhibition:
|
|
|
 |
|
NPE 2012
|
The International Plastics Showcase
4/1/2012 - 4/5/2012
Venue: Orange County Convention Center, Orlando FL, United States
|
|
|
|
|
|
|
主站蜘蛛池模板：
国内偷自第一区二区三区|
国产第页|
亚洲中文字幕日产无码成人片|
免费观看a毛片一区二区不卡|
亚洲国产精品日韩AV专区|
成a人片亚洲日本久久|
亚洲一二三四区中文字幕|
18禁久久久久久久|
人妻中文系列|
另类国产ts人妖合集|
亚洲日本香蕉视频观看视频|
伊人久久精品无码麻豆一区|
亚洲av中文一区二区|
人妻中文字幕精品系列|
国产精品中文av专线|
欧美久久久久久|
萌白酱国产一区二区|
少妇午夜啪爽嗷嗷叫视频|
男女猛烈激情xx00免费视频|
中文字幕在线观看网址|
漂亮人妻被中出中文字幕久久|
狠狠爱五月丁香亚洲综|
熟女中文字幕丝袜日韩|
中文字幕精品人妻丝袜|
bt天堂新版中文在线|
亚洲精品国产一二三区|
安新县|
精品国产高清中文字幕|
亚洲综合成人av在线|
国产亚洲精品第一综合麻豆|
日韩乱码av|
国产口爆吞精在线视频2020版
|
德保县|
午夜性色一区二区三区不卡视频|
亚洲日韩久热中文字幕|
狼友福利在线|
国产在线不卡AV观看|
视频在线+欧美十亚洲曰本|
国产偷国产偷亚洲高清午夜
|
2024av在线无码中文最新|
国产AV国片精品有毛|
