Home > General Machinery > Compressors, Separating & Filtering Machinery > News



Luoyang Zhili Industry Co.,Ltd


Company \| News \| Products \| Contact Us

Twenty high performance compressors are lifting safety and efficiency at Dalkia's coal mines

7/10/2012

Antwerp, June 29, 2012. Dalkia Industry CZ a.s. recently completed a multi-year process of replacing their compressed air equipment with latest technology from Atlas Copco. The modernized compressed air system offers higher safety, lower energy consumption along with a sophisticated control system, energy recovery capability and low maintenance.

In 2005, when Dalkia Industry CZ replaced the first turbocompressor at one of their mines, it literally set off an avalanche. " In just six years, Atlas Copco machines replaced the old turbocompressors on all of Dalkia's 9 active mines, " says Francesco Pinna, General Manager of Atlas Copco Compressors, Czechia. The 20th and last compressor has recently been ceremonially put into operation. Atlas Copco delivered the equipment as complete and integrated packages, equipped with all components, internal pipe systems and connections. Annually, Dalkia can produce 2.4 billion cubic meters of compressed air for the miners there.

"The main requirement is large and stable output, a pressure of 4 to 4.5 bar at a temperature below 60ºC," says Laurent Tupinier, CEO of Dalkia Industry CZ, adding : "For work in mine shafts, compressed air is absolutely key for operational and safety reasons.

Lower cost, less emissions

All units, Type ZH 10000 and ZH 15000, are water-cooled, two-stage centrifugal air compressors and connected to central controllers which, if needed, alternate operation of individual compressors and monitor the entire compressor station. This safeguards that the compressors produce only the actual needed volume and unnecessary running times are avoided. The results are drastic savings of energy cost and lower CO2 emissions. Thanks to their energy recovery system, the cooling water of the compressors heats up the water used in the miner's showers, which additionally saves energy cost.

According to Dalkia, the new equipment minimizes maintenance time as the old equipment demanded constant attention and today it's enough to inspect the compressors once or twice a shift, which only takes several minutes.

Compressed air - the safest medium

The Atlas Copco machines support miners working as far as a kilometer below the ground. When tunneling passages that air can't get through, ventilation pipes with fans are needed to exhaust not only used air, but also some methane at the same time. And compressed air is the safest propulsion medium for fans. Besides fans, in mine operation other equipment is run by compressed air, such as drilling machines, transport gates, pick hammers, hand tools and much more.

About Dalkia

Dalkia Industry CZ a.s. is one of the most important energy groups in the Czech Republic. It has operated there since 1991 and has gradually positioned itself as a leading producer and distributor of heat and electrical energy for the Czech market. Currently, the Dalkia group in the Czech Republic employs almost 2,500 and consists of eight companies: Dalkia Czech Republic, Dalkia Kolín, Dalkia Mariánské Lázně, Olterm&TD Olomouc, AmpluServis, and since 2010 also Dalkia Industry CZ (originally called NWR Energy) including their two companies Dalkia Commodities CZ (originally CZECH-KARBON) and Dalkia Powerline (formerly NWR Energetyka Polska). For Dalkia itself, Dalkia Industry CZ serves as a worldwide standard in the mining industry, because it delivers and distributes electrical energy and produces hot water and compressed air for coal extraction in mines belonging to OKD, the largest mining company in the Czech Republic. Other clients of Dalkia Industry CZ include public sector entities

New Atlas Copco ES 16 central controller helps to save 10% energy in compressor rooms 5/17/2012

EPC 60 Retrofit enhances control of previous generations of marine centrifugal separators 5/15/2012

Atlas Copco's new water-injected screw compressor from 15 to 30 kW caters to new oil-free applications 5/3/2012

New GX 7 compressor offers Atlas Copco's reliable oil-injected screw technology at economical price 5/3/2012

Atlas Copco acquires Chinese manufacturer of compressed air treatment products 2/23/2012

Atlas Copco Portable Air becomes Portable Energy 7/15/2011

Atlas Copco offers the complete marine starting air solution up to 90 kW 7/15/2011

Compressors, Separating & Filtering Machinery Exhibitions
	ICIM 2026 6/29/2026 - 7/3/2026 Montpellier, France
	FILTECH 2026 6/30/2026 - 7/2/2026 Cologne, Germany
	NOISE-CON 2026 7/9/2026 - 7/11/2026 Los Angeles CA, United States
	ICOM 2026 7/18/2026 - 7/25/2026 San Antonio TX, United States
	AMS16 2026 TBD, TBD
More Trade Shows