Home > Die & Mould > Plastic Mould > News



RocTool France


Company \| News \| Products \| Contact Us

RocTool Launches new Performance Cooling units

1/21/2016

RocTool has enriched its range and launched the RocTool Performance Cooling (RPC) units. They are used to complement its induction heating process for plastic injection and composites processes.

"RocTool Systems & Engineering teams have developed a wide range of new performance cooling units to meet the manufacturers' growing demand in our Heat & Cool technologies in production globally" says Jean-François Martinez, RocTool's Manager for Systems and Peripherals.

The heat & cool technology company now offers a range of equipment designed to deliver high performance cooling, mainly for RocTool technology users and the new C-series has been designed specifically for RocTool processes. Dedicated to both plastic injection and composites processes, the units are easily controlled by RocTool's tactile interface.

Cycle times reduced for plastic injection

One of the main objectives for RocTool teams working on RPC units is to optimize cycle times to increase equipment productivity. With the C2V for instance, each RocTool technology user for plastic injection can improve its cooling time by reducing the flow to a laminar state during heating, while accelerating the flow to a turbulent state during cooling.

"It is a great cycle time improvement and an extra cooling control capability. It's a real technological breakthrough that enables our users to have better control over the temperature changes and save valuable production time!" explains Jean-Francois Martinez.

Besides, the T9 is a compact thermoregulation unit offering a greater cooling power at 140kW when standard equipment does not exceed 40kW, as well as high pressure and controlled flow rates.

….For Composites as well!

Especially designed for RocTool composite processing, the C-series has been developed to improve the complete cycle time by purging the water from the mold in order to reduce the heating time and managing the water flow during the cooling time. "Our C2V unit is used with a water pressure network higher than 3 bar at 100 l/mn, when our C6, C12 and C24 units are used with a water pressure network at 3 bar maximum, the flowrate depending on the model chosen. During the purging sequence, water mixed with compressed air is sent back to a tank to prevent any turbulence in the water network" adds Jean-Francois Martinez.

Husky demonstrates range of innovative technologies for beverage packaging at NPE 2015 3/24/2015

Husky showcases new barrier solution, demonstrates range of innovative technologies for beverage packaging, medical and hot runners at NPE 2015 1/20/2015

Trexel, Inc. and Milacron enter into Partnership Agreement for MuCell® Injection Molding Technology 11/6/2014

Husky takes hot runner and controller capability to the next level - innovative technologies for total mold control at Fakuma 2014 10/5/2014

INCOE Corporation Announces the Grand Opening of their New European Headquarters 6/4/2014

Husky introduces UNIFY™ manifold systems at Chinaplas 2014 4/29/2014

INCOE® Introduces HEM Miniature Hydraulics and VIX Tips at Euromold 2013 12/6/2013

Husky launches HyPET® HPP5 Preform Moulding System 11/16/2013

K Show 2013: RocTool presents three last generation technologies for quick molding 9/26/2013

Plastic Mould Exhibitions
	Elmia Polymer 2026 5/19/2026 - 5/22/2026 Jonkoping, Sweden
	INTERMOLD / Die & Mold Asia Nagoya 2026 5/20/2026 - 5/22/2026 Nagoya, Japan
	Plast Expo UA 2026 5/26/2026 - 5/28/2026 Kiev, Ukraine
	Rotomould 2026 6/1/2026 - 6/3/2026 Melbourne, Australia
	Interplas 2026 6/2/2026 - 6/4/2026 Birmingham, United Kingdom
More Trade Shows