Home > Die & Mould > Plastic Mould > News



Mold Craft, Inc.


Company \| News \| Products \| Contact Us

Mold Craft tool to help showcase Sodick Plustech's new micro molding machine at NPE2012

3/13/2012

Mold Craft Inc. (booth 1295) will showcase a 4-cavity mold for very small parts at NPE2012. The "funnel tip" component for a medical customer of Mold Craft's will run in the new Sodick Plustech LP20EH2 Micro Molding series with a 12-mm diameter plunger. Sodick's booth is #363.

The funnel tip, which was molded of PEEK, has a minimum thin wall section of 0.008 inch. Designed and built by Mold Craft, the tool incorporates the patented MeltFilpper technology from Beaumont Technologies. The part is 1.3 inches long by .054 inch at the top of the funnel and .039 inch at the tip.

According to Jim Liddel, new business development for Mold Craft, the mold started out as a single-cavity tool designed in a larger mold base to accommodate expansion. "To prove out the design, Sodick ran the mold and it worked so well that the mold was then expanded to four cavities," he states. "Eventually, the mold will be an 8-cavity tool."

Mold Craft worked with Beaumont Technologies to verify the mold design using Beaumont's proprietary VeriFlo mold-filling analysis software. Melt Flipper was used in the mold because there was concern about the material flow and being able to fill the cavities evenly using PEEK material. "The mold-filling analysis revealed a number of negative effects from shear," notes Liddel. "The MeltFlipper technology eliminated those concerns."

A mold manufacturer that typically specializes in high-cavitation production molds for the medical, connector, and electrical markets, Mold Craft also creates MIM molds for a variety of industries.

Related Exhibition:



			NPE 2012
			The International Plastics Showcase 4/1/2012 - 4/5/2012 Venue: Orange County Convention Center, Orlando FL, United States

Glueless production of disposable syringes 2/29/2012

Trexel Promotes New Process Solutions at NPE 2012 2/28/2012

Venting the extrusion mould 2/28/2012

Günther Hot-Runner Technology promotes energy efficiency and flexibility in mould designing 2/22/2012

DME to Display Wide Range of Engineered Hot Runner Solutions at NPE 2/21/2012

NEW "Request For Quotation" online form added for Melt Filtration and Machine nozzles 11/17/2011

Hagen Award for Kautex Maschinenbau 11/17/2011

SYNVENTIVE eGate® - A HIGH PERFORMANCE ELECTRIC VALVE GATE HOT RUNNER SYSTEM 11/15/2011

IML with labels printed on both sides for the perfect decoration of drinking cups 10/21/2011

Plastic Mould Exhibitions
	Elmia Polymer 2026 5/19/2026 - 5/22/2026 Jonkoping, Sweden
	INTERMOLD / Die & Mold Asia Nagoya 2026 5/20/2026 - 5/22/2026 Nagoya, Japan
	Plast Expo UA 2026 5/26/2026 - 5/28/2026 Kiev, Ukraine
	Rotomould 2026 6/1/2026 - 6/3/2026 Melbourne, Australia
	Interplas 2026 6/2/2026 - 6/4/2026 Birmingham, United Kingdom
More Trade Shows